gaqreviews.blogg.se - Tool studio emmc download s3

> of people, I know nothing about Angström, and the first thing I did was to > I've no idea what bootloader the Debian image flashed to my eMMC (as a lot > properly work with the uEnv.txt put onto the uSD card as part of following > This tells me that the bootloader you flashed onto the eMMC doesn't > o If I press no button, the BBB boots on the eMMC > - I followed your instructions (8GB µSD, FAT32 formatted) 64DesktopHardware.> On Thursday, Octo2:10:24 PM UTC-7, Jason Kridner wrote:.This test will now appear in the list of applicable tests for the selected system target in HLK studio.Click on the check box to enable this optional feature.Scroll down to select the feature named:.A Device Feature List window will open up.Right click on the selected system target.

It will not appear in the list of tests in HLK studio for a system target by default.Optional: To enable it to show up in the list of tests for system target in HLK studio, run the following steps: Note: This test is associated with an optional feature: 64DesktopHardware.

Set Boot from USB to enabled in UEFI menu.

Flashing should complete successfully, all commands should exit with 'Status: 0 The operation complete successfully'.

From an administrative command prompt, run the following commands:emmcdl - p COMxx - f prog_ufs_firehose_8998_ddr.elf - memoryname ufs - x rawprogram0.xmlemmcdl - p COMxx - f prog_ufs_firehose_8998_ddr.elf - memoryname ufs - x rawprogram1.xmlemmcdl - p COMxx - f prog_ufs_firehose_8998_ddr.elf - memoryname ufs - x rawprogram2.xmlemmcdl - p COMxx - f prog_ufs_firehose_8998_ddr.elf - memoryname ufs - x rawprogram3.xmlemmcdl - p COMxx - f prog_ufs_firehose_8998_ddr.elf - memoryname ufs - x rawprogram4.xmlemmcdl - p COMxx - f prog_ufs_firehose_8998_ddr.elf - memoryname ufs - x rawprogram5.xml.

The device should enumerate as Qualcomm HS - USB QDLoader endpoint on a COM port

Attach the device to host PC using a regular USB cable.

There will be no indication that the device is on (dark display).

Or enter EDL mode using UEFI menu at boot.

Or use jumper # 6 in S4 on debug board to force device into EDL mode.

Either device has to have an empty EMMC (out of box or JTAG wiped).

Boot the device into Emergency Download mode (EDL).